Postby guilty338 » Sun Nov 02, 2008 7:03 pm

Nah, missed out on the marine speakers. Not too fused
guilty338
Blind 3
 
Posts: 445
Joined: Tue Jun 05, 2007 12:00 am
Location: Woodanilling WA
Has thanked: 0 time
Been thanked: 18 times

Postby guilty338 » Sat Nov 22, 2008 2:01 am

UPDATE
G'day, a quick update-

Got some paint on the hull at last. Pretty happy with the results considering the amount of fibreglass work that was required.

Now that's done it's time to get the trailer squared away so we can flip the bat back over and finish the filling and sanding on the deck. The pics below show the trailer as we started, and as it stands tonight. Lets just hope it goes back together again........
You do not have the required permissions to view the files attached to this post.
guilty338
Blind 3
 
Posts: 445
Joined: Tue Jun 05, 2007 12:00 am
Location: Woodanilling WA
Has thanked: 0 time
Been thanked: 18 times

Postby will » Sat Nov 22, 2008 6:05 am

I first looked at this thread when it started, and I've only had my second look now. Great work mate! Its inspiring! :)
Enjoy the ride. Any time on the water is good time!
User avatar
will
900
 
Posts: 2240
Joined: Tue Jun 17, 2003 12:00 am
Location: Fraser Coast
Has thanked: 47 times
Been thanked: 29 times

Postby guilty338 » Sat Nov 22, 2008 11:04 pm

Big day today, got stuck into the trailer.

We decided to keep the centre spine from the previous trailer and build the rest. The trailer has square axles and slipper springs with 13 inch galvanised steel wheels. There is still a bit of work to do before cleaning it up for a coat of paint, need to fit the guards and new winch pole- but it's not bad for a Saturdays work.
You do not have the required permissions to view the files attached to this post.
guilty338
Blind 3
 
Posts: 445
Joined: Tue Jun 05, 2007 12:00 am
Location: Woodanilling WA
Has thanked: 0 time
Been thanked: 18 times

Postby nevergrew » Sun Nov 23, 2008 6:57 am

Impressive dude. I'm loving this thread. 8)
User avatar
nevergrew
Ozmosis 7
Nautique Owner
 
Posts: 4210
Joined: Sat May 08, 2004 12:00 am
Location: Central Coast
Has thanked: 12 times
Been thanked: 87 times

Postby mof » Sun Nov 23, 2008 8:31 pm

The rear rollers to guide onto the centre spine are great. Nothing worse than trying to line up a boat on a centre spine trailer with no other guide.
User avatar
mof
Slurpee
 
Posts: 779
Joined: Tue Mar 08, 2005 11:00 pm
Location: Sydney
Has thanked: 4 times
Been thanked: 15 times

Postby matto » Sun Nov 23, 2008 10:45 pm

Mate i've been watching this tread for a while and its comin along great. Keep the good work!!
User avatar
matto
180
 
Posts: 96
Joined: Fri Nov 12, 2004 11:00 pm
Location: Townsville
Has thanked: 0 time
Been thanked: 0 time

Postby mof » Thu Feb 05, 2009 7:45 am

Two and a half months since last update. Any progress?
User avatar
mof
Slurpee
 
Posts: 779
Joined: Tue Mar 08, 2005 11:00 pm
Location: Sydney
Has thanked: 4 times
Been thanked: 15 times

Postby guilty338 » Thu Feb 05, 2009 11:56 pm

been pretty quiet lately, boarding and hot days got in the way. Finished the trailer yesterday and i'm moving to the country this week so the boat is off to a new home. I'll be back into it asap- however I think the end is now looking like during/after winter.
guilty338
Blind 3
 
Posts: 445
Joined: Tue Jun 05, 2007 12:00 am
Location: Woodanilling WA
Has thanked: 0 time
Been thanked: 18 times

Postby CrAiGzEE » Fri May 22, 2009 12:37 pm

great job there mate, keep up the solid work! (damn i sound like a school teacher)
CrAiGzEE
Wake to Wake
 
Posts: 41
Joined: Sun May 17, 2009 12:00 am
Location: NSW
Has thanked: 0 time
Been thanked: 0 time

Postby guilty338 » Mon Nov 29, 2010 2:34 pm

G'day all.

After a long period of slacking off and ignoring my half complete rebuild I have finally picked the tools back up to try and finish the job.

Over the weekend I ventured back into the shed to have a crack at properly mounting the guards (they were bodged on to move the boat some 12 months + ago). During this week I will have a crack at fabricating a new winch pole and mount a swing away jockey wheel. Also on the cards for the trailer is some angle mounts for decking boards in order to make the trailer 'walk down' friendly.

I will post some pics as soon as I can dust off the old camera.

Question: Where do most people mount the spare wheel on their boat trailers? I was thinking the logical position was on the winch pole.... any better ideas?
guilty338
Blind 3
 
Posts: 445
Joined: Tue Jun 05, 2007 12:00 am
Location: Woodanilling WA
Has thanked: 0 time
Been thanked: 18 times

Postby sheelos » Mon Nov 29, 2010 3:34 pm

holy dude this is an awesome build up! good work I hope you find the motivation to get right back into it!
User avatar
sheelos
OHH
Flightcraft Owner
Malibu Owner
 
Posts: 467
Joined: Sun Oct 25, 2009 11:00 pm
Location: Victoria, Australia
Has thanked: 0 time
Been thanked: 5 times

Postby coody » Tue Nov 30, 2010 5:47 pm

i remember when u said it would be ready for LAST years new yrs trip bruiser!!! the spare on my trailer is mounted inbetween the "A FRAME" just in front of the keel roller
coody
Off Axis 5
Flightcraft Owner
 
Posts: 398
Joined: Wed May 06, 2009 12:00 am
Location: katanning, wa
Has thanked: 1 time
Been thanked: 11 times

Postby coody » Tue Nov 30, 2010 5:48 pm

i remember when u said it would be ready for LAST years new yrs trip bruiser!!! the spare on my trailer is mounted inbetween the "A FRAME" just in front of the keel roller
coody
Off Axis 5
Flightcraft Owner
 
Posts: 398
Joined: Wed May 06, 2009 12:00 am
Location: katanning, wa
Has thanked: 1 time
Been thanked: 11 times

Postby guilty338 » Mon Feb 21, 2011 12:38 pm

Longest trailer build ever......................................
Great to have the boat back on it but!
You do not have the required permissions to view the files attached to this post.
guilty338
Blind 3
 
Posts: 445
Joined: Tue Jun 05, 2007 12:00 am
Location: Woodanilling WA
Has thanked: 0 time
Been thanked: 18 times

Postby Tanka » Mon Feb 28, 2011 9:31 pm

Gonna be sooo satisfying to board behind this thing after building it yaself... very impressive mate, keep up the good work.
Tanka
180
 
Posts: 98
Joined: Tue Feb 08, 2011 11:00 pm
Location: Bonbeach
Has thanked: 0 time
Been thanked: 0 time

Re: Unusual Clinker Build- 'The Anyhow'

Postby guilty338 » Sat Nov 09, 2013 10:02 am

G'day all.
After another long spell of inactivity I'm back on the build. Currently have the Hamilton jet impellars out being resized and jumped into my first bit of fibreglass in years.

Hopefully the picture loads up, but I have attempted to make a fibreglass piece to mount the bottom of the windscreen to the deck. I used some ply and tape to create a mold of the deck, hopefully it releases properly.
You do not have the required permissions to view the files attached to this post.
guilty338
Blind 3
 
Posts: 445
Joined: Tue Jun 05, 2007 12:00 am
Location: Woodanilling WA
Has thanked: 0 time
Been thanked: 18 times

Re: Unusual Clinker Build- 'The Anyhow'

Postby guilty338 » Sat Nov 16, 2013 9:32 pm

Filled& sanded the deck and interior panels this week before undercoating with epinamel sand able undercoat.
You do not have the required permissions to view the files attached to this post.
guilty338
Blind 3
 
Posts: 445
Joined: Tue Jun 05, 2007 12:00 am
Location: Woodanilling WA
Has thanked: 0 time
Been thanked: 18 times

Re: Unusual Clinker Build- 'The Anyhow'

Postby guilty338 » Sat Nov 16, 2013 9:34 pm

Another
You do not have the required permissions to view the files attached to this post.
guilty338
Blind 3
 
Posts: 445
Joined: Tue Jun 05, 2007 12:00 am
Location: Woodanilling WA
Has thanked: 0 time
Been thanked: 18 times

Re: Unusual Clinker Build- 'The Anyhow'

Postby guilty338 » Sun Dec 01, 2013 10:11 pm

Quick update:
Two coats of undercoat, lots of sanding and some polyester filler.
Put the first coat of poly u 400 topcoat on the deck and interior panels today.
You do not have the required permissions to view the files attached to this post.
guilty338
Blind 3
 
Posts: 445
Joined: Tue Jun 05, 2007 12:00 am
Location: Woodanilling WA
Has thanked: 0 time
Been thanked: 18 times

PreviousNext

Who is online

Users browsing this forum: MACH6 and 14 guests