Re: This winters project

Postby JBWake » Sat Dec 03, 2016 10:59 pm

I like this project. But you do know that image links don't work in this forum?
Brownie knows boats!
User avatar
JBWake
Pete Rose
Nautique Owner
 
Posts: 1635
Joined: Sun Feb 23, 2003 11:00 pm
Location: Brisbane
Has thanked: 6 times
Been thanked: 21 times

Re: This winters project

Postby 82Juddcraft » Sun Dec 04, 2016 6:34 am

I'll suss it out.
Last edited by 82Juddcraft on Wed Dec 07, 2016 9:12 pm, edited 1 time in total.
82Juddcraft
Raley
 
Posts: 211
Joined: Sat Jan 09, 2016 10:46 pm
Has thanked: 74 times
Been thanked: 12 times

Re: This winters project

Postby 82Juddcraft » Mon Dec 05, 2016 6:17 pm

rps20161207_220820.jpg

Had a balls up yesty I've got a pre alpha bell housing/flywheel cover. So it didn't fit the bravo drive transom assembly.
You do not have the required permissions to view the files attached to this post.
Last edited by 82Juddcraft on Wed Dec 07, 2016 9:10 pm, edited 1 time in total.
82Juddcraft
Raley
 
Posts: 211
Joined: Sat Jan 09, 2016 10:46 pm
Has thanked: 74 times
Been thanked: 12 times

Re: This winters project

Postby 82Juddcraft » Wed Dec 07, 2016 8:56 pm

Got some carpet choices. Leaning towards the black n white. Because I'm going for tan seats.
Went to Beaumont's $150 to do the whole boat, $700 at Bunnings and their carpets junk.
You do not have the required permissions to view the files attached to this post.
82Juddcraft
Raley
 
Posts: 211
Joined: Sat Jan 09, 2016 10:46 pm
Has thanked: 74 times
Been thanked: 12 times

Re: This winters project

Postby 82Juddcraft » Wed Dec 07, 2016 9:55 pm

JBWake wrote:I like this project. But you do know that image links don't work in this forum?

I fixed all them images up, I hope they work now.
82Juddcraft
Raley
 
Posts: 211
Joined: Sat Jan 09, 2016 10:46 pm
Has thanked: 74 times
Been thanked: 12 times

Re: This winters project

Postby JBWake » Thu Dec 08, 2016 3:52 pm

Yep all good now.

Looks fast! As long as it sounds fast - That's what's most important :)
Brownie knows boats!
User avatar
JBWake
Pete Rose
Nautique Owner
 
Posts: 1635
Joined: Sun Feb 23, 2003 11:00 pm
Location: Brisbane
Has thanked: 6 times
Been thanked: 21 times

Re: This winters project

Postby 82Juddcraft » Thu Dec 08, 2016 4:19 pm

JBWake wrote:Yep all good now.

Looks fast! As long as it sounds fast - That's what's most important :)

Ooo yeah, it'll sound tough... and pull like a teenager.
82Juddcraft
Raley
 
Posts: 211
Joined: Sat Jan 09, 2016 10:46 pm
Has thanked: 74 times
Been thanked: 12 times

Re: This winters project

Postby 82Juddcraft » Fri Dec 09, 2016 3:28 pm

I've found a new bell housing in Sydney but because it Friday arvo they don't wanna know me till Monday, it'll be Christmas by the time I get a chance to bolt it all up.
82Juddcraft
Raley
 
Posts: 211
Joined: Sat Jan 09, 2016 10:46 pm
Has thanked: 74 times
Been thanked: 12 times

Re: This winters project

Postby Feetfirst » Tue Dec 13, 2016 1:06 pm

Been a few days Juddie, how's the boat going???
Feetfirst
Tantrum
Skicraft Owner
 
Posts: 106
Joined: Fri Jun 10, 2016 8:55 am
Location: Bargara
Has thanked: 7 times
Been thanked: 25 times

Re: This winters project

Postby 82Juddcraft » Tue Dec 13, 2016 1:56 pm

Feetfirst wrote:Been a few days Juddie, how's the boat going???

Na not a lots happened.
Been chasing up a heap of gear tho.
Picked up the carpet but it can't go in till the exhausts have been modified.
Picked up a flame arrest.
rps20161213_150312.jpg

Picked up a Hour meter.
rps20161213_150340.jpg

Picked up a 16 core cable for the wiring loom, probably won't use all the cores but I'd rather have a few spare.
rps20161213_150402.jpg


Ordered a new 4 position ignition (off-acc-on-start)
rps20161213_145919.jpg

Ordered a new gear shift lever.
rps20161213_151439.jpg

New shift cable and mercruiser adapter kit.
rps20161213_151900.jpg

New throttle cable, I lashed out and got the high quality low friction cable for the throttle and cheaped out and got the standard cable for the shifter. Hopefully it'll make the throttle more responsive, the shift cables just forward/reverse so it's not really doing much, it just gotta work.
rps20161213_151415.jpg

Ordered the shift assembly out of Melbourne wreckers (Sealink Marine) they're real handy and helpful but a lil pricey.
rps20161213_150732.jpg

Ordered the SBC to Bravo Bellhousing/flywheel cover from Sydney Wreckers (Moby Marine) so once that turns up and I get a spare moment it'll all happen pretty quick.
rps20161213_150709.jpg

Getting a new main pulley machined up, I rang him yesterday and he said the material only turned up Friday, so it's on his list of jobs this week.

I'm looking at making up a couple of orifices out of a couple of brass grub screws to restrict the water flow into the headers, there's some on eBay but I ain't paying $30 for a couple of grub screws.
rps20161213_145937.jpg


Got the local shop chasing up a new skeg and I'll get a mate to graft it onto the leg while it's off.

But I don't want to get to far in front till I get these exhausts on.
You do not have the required permissions to view the files attached to this post.
82Juddcraft
Raley
 
Posts: 211
Joined: Sat Jan 09, 2016 10:46 pm
Has thanked: 74 times
Been thanked: 12 times

Re: This winters project

Postby 82Juddcraft » Tue Dec 13, 2016 7:32 pm

rps20161213_203034.jpg

rps20161213_201529.jpg
rps20161213_201443.jpg
rps20161213_201407.jpg
rps20161213_201333.jpg
rps20161213_201249.jpg
rps20161213_201159.jpg
rps20161213_201049.jpg
rps20161213_201005.jpg
rps20161213_195534.jpg


https://youtu.be/oKl_iXfSxJ4

Now I got the hang of putting pictures up to here's some of the stuff ya might have missed.
You do not have the required permissions to view the files attached to this post.
82Juddcraft
Raley
 
Posts: 211
Joined: Sat Jan 09, 2016 10:46 pm
Has thanked: 74 times
Been thanked: 12 times

Re: This winters project

Postby 82Juddcraft » Thu Dec 15, 2016 9:13 pm

Picked up the main pulley from the machine shop today.
rps20161215_221140.jpg
rps20161215_221119.jpg
You do not have the required permissions to view the files attached to this post.
82Juddcraft
Raley
 
Posts: 211
Joined: Sat Jan 09, 2016 10:46 pm
Has thanked: 74 times
Been thanked: 12 times

Re: This winters project

Postby 82Juddcraft » Tue Jan 03, 2017 6:27 pm

Haven't really done much on it lately, too many of them ones
All that gear turned up, but I'm still waiting on the bellhousing from the wreckers.
I finally got onto them today but the guy just blew me off and said ring tomorrow when the reception chick was in.

Got to start drilling out the dash this week after work.
82Juddcraft
Raley
 
Posts: 211
Joined: Sat Jan 09, 2016 10:46 pm
Has thanked: 74 times
Been thanked: 12 times

Re: This winters project

Postby 82Juddcraft » Wed Jan 04, 2017 8:19 pm

Roughly marked out the dash.
rps20170104_205541.jpg

Was going to cut it out but missing a 82mm holesaw for the tacho.
By the time u put in a steering wheel and navigator seat there's not much room on the dash to put much.
I thought of maybe getting some of them Can Mount gauges but I thought it would look wanky.
images (37).jpg

So I'm running a
Tacho
Coolant temp
Oil pressure
Volts
Hrs
And for switches
Fuel pump on/off
Coolant Temp pos1/pos2 (switching between cylinder heads)
Bilge Pump on/off
Bilge Blower on/off
Wet Exhaust on/off/auto (auto will come on at ~2000rpm of the engine)

I'll sneak the ignition between the steering wheel n tacho and put a cigarette lighter in somewhere where it fits.

Stereo can go in the side wall between the navi and back seat. Wouldn't mind a GPS in there somewhere but that's years off.
You do not have the required permissions to view the files attached to this post.
82Juddcraft
Raley
 
Posts: 211
Joined: Sat Jan 09, 2016 10:46 pm
Has thanked: 74 times
Been thanked: 12 times

Re: This winters project

Postby Renton » Wed Jan 04, 2017 9:43 pm

This is awesome. Love seeing projects like this :)

What will be the main purpose once finished, just social skiing/hooning? I'm guessing with the stereo install it won't be for completion use?
Renton
Surface 180
 
Posts: 17
Joined: Wed Nov 16, 2016 8:46 pm
Location: WA
Has thanked: 1 time
Been thanked: 3 times

Re: This winters project

Postby 82Juddcraft » Thu Jan 05, 2017 5:04 am

Renton wrote:This is awesome. Love seeing projects like this :)

What will be the main purpose once finished, just social skiing/hooning? I'm guessing with the stereo install it won't be for completion use?

It started out as get it going again, then it's just snow balled. I'd just put it down to a resto of a old boat, not too many Judd's around.
I just want something that's reliable till I get something bigger for the family or get sick of having a rear mount.
82Juddcraft
Raley
 
Posts: 211
Joined: Sat Jan 09, 2016 10:46 pm
Has thanked: 74 times
Been thanked: 12 times

Re: This winters project

Postby 82Juddcraft » Thu Jan 05, 2017 9:42 pm

Finally after 3 days of ringing the guy the piece of the puzzle has turned up.
rps20170105_224142.jpg

I pressed the new bushes of the other one in and tomorrow night I'll give it a birthday.
Take2 of engine going in will be Sunday.
I'll start bolting up most of what I can over the next few nights after work.
You do not have the required permissions to view the files attached to this post.
82Juddcraft
Raley
 
Posts: 211
Joined: Sat Jan 09, 2016 10:46 pm
Has thanked: 74 times
Been thanked: 12 times

Re: This winters project

Postby 82Juddcraft » Fri Jan 06, 2017 8:39 am

What do yas reckon about running a 200m carbon fiber wrap along the dash or wherever 2m gets me?
unnamed (2).jpg

rps20170104_205541.jpg

Ya can get a 2m x 300mm length of wrap off eBay pretty cheap.
You do not have the required permissions to view the files attached to this post.
82Juddcraft
Raley
 
Posts: 211
Joined: Sat Jan 09, 2016 10:46 pm
Has thanked: 74 times
Been thanked: 12 times

Re: This winters project

Postby Renton » Fri Jan 06, 2017 2:35 pm

Carbon fibre is good. I like it 8-)

As long as you use those missile launcher switches too!
Renton
Surface 180
 
Posts: 17
Joined: Wed Nov 16, 2016 8:46 pm
Location: WA
Has thanked: 1 time
Been thanked: 3 times

Re: This winters project

Postby 82Juddcraft » Fri Jan 06, 2017 4:13 pm

Renton wrote:Carbon fibre is good. I like it 8-)

As long as you use those missile launcher switches too!

Yep it'll look sick
82Juddcraft
Raley
 
Posts: 211
Joined: Sat Jan 09, 2016 10:46 pm
Has thanked: 74 times
Been thanked: 12 times

PreviousNext

Who is online

Users browsing this forum: Bing [Bot] and 5 guests